ASA · £8–15 · 3 working days
Tractor cab dashboard vent louvre
Directional dash vents on cabs from the 1980s onward — most are a variation of two or three patterns.
What goes wrong with the original.
Decades of cab heat and direct sun through the screen. The vanes go brittle, the pivot pins shear, and the vent either jams open or falls into the dashboard.
ASA
It sits behind glass in the hottest part of the cab. ASA's heat resistance is well above what a dashboard reaches; PLA would deform on the first hot afternoon.
Orientation, infill and fixings
Vanes printed flat for a clean face, pins solid. We measure the housing aperture and pivot spacing from your original so it clicks into the existing surround.
£8–15 · indicative
Quoted properly from your photograph. Ready in about 3 working days from the original or a good picture; batches take a little longer and cost less per part.
Send a photograph of yours.
Yours will differ from the one described here — they always do. The picture tells us how.
Other parts in this sheet.
ASA · Free with RTK corrections
RTK GNSS antenna mount for a tractor roof
Any survey-style GNSS antenna with a 5/8" × 11 TPI thread, on a flat or gently curved cab roof
Details →ASA · £6–9
Electric fence gate handle body
Standard spring-loaded insulated gate handles, most makes
Details →PETG · £5–8
Water trough float valve arm
Lever-type float valves on cattle and sheep troughs — send a photo, they vary by make
Details →