ASA · £8–14 · 3 working days
Field gate latch striker body
Slam-shut and lever latches on steel and timber field gates.
What goes wrong with the original.
The plastic striker or guide block wears oval and the gate no longer catches, or it shatters when the gate is swung shut hard in wind.
ASA
Outdoors, permanently. ASA for UV; printed thick because this takes impact.
Orientation, infill and fixings
High wall count, 60% infill. Fixing holes sized for coach bolts rather than screws so it cannot pull through.
Stated plainly
Striker and guide bodies only, where the load path is through steel. We do not print the load-bearing hook, the hinge, or anything that holds the gate shut against livestock on its own.
£8–14 · indicative
Quoted properly from your photograph. Ready in about 3 working days from the original or a good picture; batches take a little longer and cost less per part.
Send a photograph of yours.
Yours will differ from the one described here — they always do. The picture tells us how.
Other parts in this sheet.
ASA · Free with RTK corrections
RTK GNSS antenna mount for a tractor roof
Any survey-style GNSS antenna with a 5/8" × 11 TPI thread, on a flat or gently curved cab roof
Details →ASA · £6–9
Electric fence gate handle body
Standard spring-loaded insulated gate handles, most makes
Details →PETG · £5–8
Water trough float valve arm
Lever-type float valves on cattle and sheep troughs — send a photo, they vary by make
Details →